Trace elements in commercially available infant formulas in Iran: Determination and estimation of health risks.

Infants are significantly more vulnerable to trace elements from their foods. The objective of the present study was to ascertain the concentrations of some trace elements namely; arsenic, cadmium, chromium, copper, nickel and lead in infant formulas sold in Iran and to estimate the potential health risks to the infants through consumption of these products. The mean concentrations of As, Cd, Cr, Cu, Ni and Pb in infant formula samples were 0.006, 0.040, 0.3980, 2.014, 0.166 and 0.285 mg/kg, respectively. The mean levels of the trace elements were in the following order: Cu > Cr > Pb > Ni > Cd > As. For arsenic, cadmium and copper, calculated EWIs (estimated weekly intakes) were within the PTWIs (provisional tolerated weekly intakes) recommended by FAO/WHO. For chromium, nickel and lead, the calculated EWIs were higher than the PTWIs in 88.8 %, 75 %, and 61.1 % of the formulas. HQs of Pb, Cu, Cd and As were above the safe limits, indicating health concerns from the consumption of some infant formulas. Based on the CR classification, CR values of some elements including Cd, Cr and Ni were above 1 × 10-4 in some brands, indicating that exposure to these elements from infant formulas may cause health risks. Therefore, regular monitoring of all the raw materials, stages of production and storage of infant formulas is essential to limit the exposure of this vulnerable age group to toxic trace elements.

Accumulation of potentially toxic elements in fourfinger threadfin (Eleutheronema tetradactylum) and black pomfret (Parastromateus niger) from Selangor, Malaysia.

The accumulation of potentially toxic elements (PTEs) has raised public awareness due to harmful contamination to both human and marine creatures. This study was designed to determine the concentration of copper (Cu), zinc (Zn), cadmium (Cd), and nickel (Ni) in the intestine, kidney, muscle, gill, and liver tissues of local commercial edible fish, fourfinger threadfin (Eleutheronema tetradactylum), and black pomfret (Parastromateus niger) collected from Morib (M) and Kuala Selangor (KS). Among the studied PTEs, Cu and Zn were essential elements to regulate body metabolism with certain dosages required while Cd and Ni were considered as non-essential elements that posed chronic and carcinogenic risk. The concentration of PTEs in fish tissue samples was analyzed using flame atomic absorption spectrometry (F-AAS). By comparing the concentration of PTEs in fish tissues as a bioindicator, the environmental risk of Morib was more serious than Kuala Selangor because both fish species collected from Morib resulted in a higher PTEs concentration. For an average 62 kg adult with a fish ingestion rate (FIR) of 0.16 kg/person/day in Malaysia, the estimated weekly intake (EWI) of Cd from the consumption of E. tetradactylum (M: 0.0135 mg/kg; KS: 0.0134 mg/kg) and P. niger (M: 0.0140 mg/kg; KS: 0.0132 mg/kg) had exceeded the provisional tolerable weekly intake (Cd: 0.007 mg/kg) established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and oral reference dose (ORD) values of Cd (0.001 mg/kg/day) as provided by the United States Environmental Protection Agency (USEPA) regional screening level, thus it posed chronic risks for daily basis consumption. Besides, the value of the carcinogenic risk of Cd (0.7-3 to 0.8-3) and Ni (0.5-3 to 0.6-3) were in between the acceptable range (10-6 to 10-4) of the health index that indicates a relatively low possibility cancer occurrence to the consumers in both Morib and Kuala Selangor. This study recommended FIR to be 0.80 kg/person/day to reduce the possibility of posing chronic and carcinogenic risks while at the same time obtaining the essential nutrients from the fish.

Identification of the single and combined acute toxicity of Cr and Ni with Heterocypris sp. and the quantitative structure-activity relationship (QSAR) model.

Mining wastewater with heavy metals poses a serious threat to the ecological environment. However, the acute single and combined ecological effects of heavy metals, such as chromium (Cr) and nickel (Ni), on freshwater ostracods, and the development of relevant prediction models, remain poorly understood. In this study, Heterocypris sp. was chosen to investigate the single and combined acute toxicity of Cr and Ni. Then, the quantitative structure-activity relationship (QSAR) model was used to predict the combined toxicity of Cr and Ni. The single acute toxicity experiments revealed high toxicity for both Cr and Ni. In addition, Cr exhibited greater toxicity compared to Ni, as evidenced by its lower 96-hour half-lethal concentration (LC50) of 1.07 mg/L compared to 4.7 mg/L for Ni. Furthermore, the combined acute toxicity experiments showed that the toxicity of Cr-Ni was higher than Ni but lower than Cr. Compared with the concentration addition (CA) and independent action (IA) models, the predicted results of the QSAR model were more consistent with the experimental results for the Cr-Ni combined acute toxicity. So, the high accuracy of QSAR model identified its feasibility to predict the toxicity of heavy metal pollutants in mining wastewater.

Assessing the health risks of heavy metals and seasonal minerals fluctuations in Camellia sinensis cultivars during their growth seasons.

The risk assessment of heavy metals in tea is extremely imperative for the health of tea consumers. However, the effects of varietal variations and seasonal fluctuations on heavy metals and minerals in tea plants remain unclear. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to evaluate the contents of aluminum (Al), manganese (Mn), magnesium (Mg), boron (B), calcium (Ca), copper (Cu), cobalt (Co), iron (Fe), sodium (Na), zinc (Zn), arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), and antimony (Sb) in the two categories of young leaves (YL) and mature leaves (ML) of tea (Camellia sinensis) cultivars throughout the growing seasons. The results showed significant variations in the contents of the investigated nutrients both among the different cultivars and growing seasons as well. Furthermore, the average concentrations of Al, Mn, Mg, B, Ca, Cu, Co, Fe, Na, Zn, As, Cd, Cr, Ni, and Sb in YL ranged, from 671.58-2209.12, 1260.58-1902.21, 2290.56-2995.36, 91.18-164.68, 821.95-5708.20, 2.55-3.80, 3.96-25.22, 37.95-202.84, 81.79-205.05, 27.10-69.67, 0.028-0.053, 0.065-0.127, 2.40-3.73, 10.57-12.64, 0.11-0.14 mg kg-1, respectively. In ML, the concentrations were 2626.41-7834.60, 3980.82-6473.64, 3335.38-4537.48, 327.33-501.70, 9619.89-13153.68, 4.23-8.18, 17.23-34.20, 329.39-567.19, 145.36-248.69, 40.50-81.42, 0.089-0.169, 0.23-0.27, 5.24-7.89, 18.51-23.97, 0.15-0.19 mg kg-1, respectively. The contents of all analyzed nutrients were found to be higher in ML than in YL. Target hazard quotients (THQ) of As, Cd, Cr, Ni, and Sb, as well as the hazard index (HI), were all less than one, suggesting no risk to human health via tea consumption. This research might provide the groundwork for essential minerals recommendations, as well as a better understanding and management of heavy metal risks in tea.

Serpentine environment prevails over geographic distribution in shaping the genetic diversity of Medicago lupulina L.

Edaphic conditions of serpentine soils, naturally rich in heavy metals, act as a strong selection pressure that shapes specific metal-tolerant ecotypes. Medicago lupulina L. (black medick) is not only a widespread plant species that prefers calcareous and dry soil types but also grows at the borders of serpentine formations. It can also be found in waste and disturbed habitats. This is a species with reported phytoremediation potential, however, there is no published data regarding the impact of the environment on the genetic distribution of this species. The aim of our research was to explore how selection pressure of serpentine soils affects genetic diversity of M. lupulina and to test heavy-metal accumulation capacity of this species. Specimens of 11 M. lupulina populations were collected from serpentine outcrops located in Central and Eastern Bosnia as well as from non-serpentine sites. Soil and plant samples were analyzed for the total contents of heavy metals using air-acetylene flame atomic absorption spectroscopy. Genetic diversity was analyzed using AFLP (Amplified Fragment Length Polymorphism) markers. Serpentine soils showed high nickel, cobalt, chromium and iron concentrations. Nickel and manganese concentrations in soil samples and plant material showed statistically significant correlation. Although plants in two populations show the ability to extract Ni, M. lupulina does not show hyperaccumulating properties. Despite severe selective pressure, genetic diversity in serpentine populations is not reduced. Analyses of intrapopulation and interpopulation genetic diversity showed significant genetic differentiation among populations which is not related to their geographic distance. Population from non-metalliferous soil showed clear separation from all other populations. Diversity data suggest that serpentine populations maintain genetic diversity by undetected mechanisms and that edaphic factors rather than geography influence genetic structure analyzed M. lupulina populations.

Mixture effects of trace element levels on cardiovascular diseases and type 2 diabetes risk in adults using G-computation analysis.

There is an increasing concern about the health effects of exposure to a mixture of pollutants. This study aimed to evaluate the associations between serum levels of heavy/essential metals ([Arsenic (As), Cadmium (Cd), Mercury (Hg), Lead (Pb), Nickel (Ni), Chromium (Cr), Copper (Cu), Iron (Fe), and Zinc (Zn)]) and the risk of developing cardiovascular diseases (CVDs) and type 2 diabetes mellitus (T2D). Data were collected from 450 participants (150 with CVDs, 150 with T2D, and 150 healthy subjects) randomly selected from the Ravansar Non-Communicable Disease (RaNCD) cohort in Western Iran, covering the years 2018-2023. Trace element levels in the serum samples were assayed using ICP-MS. Logistic regression was performed to estimate the adjusted risk of exposure to single and multi-metals and CVD/T2D. Odds ratios were adjusted for age, sex, education, residential areas, hypertension, and BMI. The mixture effect of exposure to multi-metals and CVD/T2D was obtained using Quantile G-computation (QGC). In the logistic regression model, chromium, nickel, and zinc levels were associated with CVD, and significant trends were observed for these chemical quartiles (P < 0.001). Arsenic, chromium, and copper levels were also associated with T2D. The weight quartile sum (WQS) index was significantly associated with both CVD (OR 4.17, 95% CI 2.16-7.69) and T2D (OR 11.96, 95% CI 5.65-18.26). Cd, Pb, and Ni were the most heavily weighed chemicals in these models.The Cd had the highest weight among the metals in the CVD model (weighted at 0.78), followed by Hg weighted at 0.197. For T2D, the serum Pb (weighted at 0.32), Ni (weighted at 0.19), Cr (weighted at 0.17), and Cd (weighted at 0.14) were the most weighted in the G-computation model. The results showed the significant role of toxic and essential elements in CVDs and T2D risk. This association may be driven primarily by cadmium and mercury for CVDs and Pb, Ni, Cr, and Cd for T2D, respectively. Prospective studies with higher sample sizes are necessary to confirm or refute our preliminary results as well as to determine other important elements.

Nickel stocks and fluxes in a tropical agromining 'metal crop' farming system in Sabah (Malaysia).

Nickel hyperaccumulator plants play a major role in nickel recycling in ultramafic ecosystems, and under agromining the nickel dynamics in the farming system will be affected by removal of nickel-rich biomass. We investigated the biogeochemical cycling of nickel as well as key nutrients in an agromining operation that uses the metal crop Phyllanthus rufuschaneyi in the first tropical metal farm located in Borneo (Sabah, Malaysia). For two years, this study monitored nine 25-m2 plots and collected information on weather, biomass exportation, water, and litter fluxes to the soil. Without harvesting, nickel inputs and outputs had only minor contributions (<1 %) to the total nickel budget in this system. The nickel cycle was mainly driven by internal fluxes, particularly plant uptake, litterfall and throughfall. After two years of cropping, the nickel litter flux corresponded to 50 % of the total nickel stock in the aerial biomass (3.1 g m-2 year-1). Nickel was slowly released from the litter; after 15 months of degradation, 60 % of the initial biomass and the initial nickel quantities were still present in the organic layer. Calcium, phosphorus and potassium budgets in the system were negative without fertilisation. Unlike what is observed for nickel, sustained agromining would thus lead to a strong depletion of calcium stocks if mineral weathering cannot replenish it.

Pollution indices of selected metals in tea (Camellia sinensis L.) growing soils of the Upper Assam region divulge a non-trifling menace of National Highway.

The study investigated the influence of a National Highway (NH) traversing tea estates (TEs) on heavy metal (HM) contamination in the top soils of Upper Assam, India. The dispersion and accumulation of six HMs, viz. cadmium (Cd), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), and zinc (Zn), within tea-growing soils were assessed using diverse indices: contamination factor (CF), degree of contamination (DC), enrichment factor (EF), geo-accumulation index (Igeo), modified degree of contamination (MDC), Nemerow pollution index (PINemerow), pollution load index (PLI), potential ecological risk factor (Eri), and potential ecological risk index (RI). The order of HM prevalence was Fe > Mn > Zn > Ni > Cu > Cd. Elevated Cd levels near the NH prompted immediate attention, while Cd and Zn showed moderate pollution in CF, EF, and RI. The remaining metals posed minimal individual risk (Eri< 40), resulting in an overall contamination range of "nil to shallow," signifying slight contamination from the studied metals. From MDC values for investigated metals, it was found to be "zero to very low degree of contamination" at all locations except the vicinity of NH. Soil pollution, as determined by PLI, indicated unpolluted soils in both districts, yet PINemerow values indicated slight pollution. The statistical analysis revealed that there is a significant decrease in most of the indices of HM as the distance from NH increases. The application of multivariate statistical techniques namely Principal Component Analysis and Cluster Analysis showed the presence of three distinct homogenous groups of distances based on different indices. This investigation underscores NH-associated anthropogenic effects on TE soil quality due to HM deposition, warranting proactive mitigation measures.

Integrated assessment of the pollution and risk of heavy metals in soils near chemical industry parks along the middle Yangtze River.

Industrialization in riparian areas of critical rivers has caused significant environmental and health impacts. Taking eight industrial parks along the middle Yangtze River as examples, this study proposes a multiple-criteria approach to investigate soil heavy metal pollution and associated ecological and health risks posed by industrial activities. Aiming at seven heavy metals, the results show that nickel (Ni), cadmium (Cd), and copper (Cu) exhibited the most significant accumulation above background levels. The comprehensive findings from Pearson correlation analysis, cluster analysis, principal component analysis, and industrial investigation uncover the primary sources of Cd, arsenic (As), mercury (Hg), and lead (Pb) to be chemical processing, while Ni and chromium (Cr) are predominantly derived from mechanical and electrical equipment manufacturing. In contrast, Cu exhibits a broad range of origins across various industrial processes. Soil heavy metals can cause serious ecological and carcinogenic health risks, of which Cd and Hg contribute to >70 % of the total ecological risk, and As contributes over 80 % of the total health risk. This study highlights the importance of employing multiple mathematical and statistical models in determining and evaluating environmental hazards, and may aid in planning the environmental remediation engineering and optimizing the industry standards.

Degradation of sulfamethazine by microbial electrolysis cell with nickel-cobalt co-modified biocathode.

In this study, nickel-cobalt co-modified stainless steel mesh (Ni-Co@SSM) was prepared and used as the biocathode in microbial electrolysis cell (MEC) for sulfamethazine (SMT) degradation. The optimal electrochemical performance of the Ni-Co@SSM was obtained at the electrodeposition time of 600 s, electrodeposition current density of 20 mA cm-2, and nickel-cobalt molar ratio of 1:2. The removal of SMT in MEC with the Ni-Co@SSM biocathode (MEC-Ni-Co@SSM) was 82%, which increased by 30% compared with the conventional anaerobic reactor. Thirteen intermediates were identified and the potential degradation pathways of SMT were proposed. Proteobacteria, Firmicutes, Patescibacteria, Chloroflexi, Bacteroidetes, and Euryarchaeota are the dominant bacteria at the phylum level in the MEC-Ni-Co@SSM, which are responsible for SMT metabolism. Due to the electrical stimulation, there was an increase in the abundance of the metabolic function and the genetic information processing. This work provides valuable insight into utilizing MECs for effective treatment of antibiotic-containing wastewater.

Efficacious adsorption of divalent nickel ions over sodium alginate-g-poly(acrylamide)/hydrolyzed Luffa cylindrica-CoFe2O4 bionanocomposite hydrogel.

Existing Ni2+ heavy metal ions in an aqueous medium are highly hazardous for living organisms and humans. Therefore, designing low-cost adsorbents with enhanced effectiveness is essential for removing nickel ions to safeguard public health. In this study, a novel green nanocomposite hydrogel was synthesized through the free radical solution and bulk polymerization method, and its capability to remove divalent nickel ions from aqueous media was examined. The bionanocomposite hydrogel named as SA-g-poly(AAm)/HL-CoFe2O4 was produced by grafting polyacrylamide (AAm) onto sodium alginate (SA) in the presence of a magnetic composite recognized as HL-CoFe2O4, where HL represents hydrolyzed Luffa Cylindrica. By employing FT-IR, XRD, VSM, SEM, EDX-Map, BET, DLS, HPLC, and TGA techniques, morphological evaluation and characterization of the adsorbents were carried out. The performance of the adsorption process was studied under varying operational conditions including pH, temperature, contact duration, initial concentration of pollutant ions, and adsorbent dosage. HPLC analysis proved the non-toxic structure of the bionanocomposite hydrogel. The number of unreacted acrylamide monomers within the hydrogel matrix was measured at 20.82 mg/kg. The optimum conditions was discovered to be pH = 6, room temperature, adsorbent dosage of 1 of g.L-1, initial Ni2+ concentration of 10 mg.L-1, and contact time of 100 min, and the maximum adsorption efficiency at optimal state was calculated as 70.09, 90.25, and 93.83 % for SA-g-poly (AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples, respectively. Langmuir isotherm model was in good agreement with the experimental data and the maximum adsorption capacity of SA-g-poly(AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples was calculated to be 31.37, 43.15, and 45.19 mg.g-1, respectively. The adsorption process, according to kinetic studies, follows a pseudo-second-order kinetic model. Investigations on thermodynamics also demonstrated that the process is exothermic and spontaneous. Exploring the interference effect of co-existing ions showed that the adsorption efficiency has decreased with concentration enhancement of Ca2+ and Na+ cations in aqueous medium. Furthermore, the adsorption/desorption assessments revealed that after 8 consecutive cycles, there had been no noticeable decline in the adsorption effectiveness. Finally, actual wastewater treatment outcomes demonstrated that the bionanocomposite hydrogel successfully removes heavy metal pollutants from shipbuilding industry effluent. Therefore, the findings revealed that the newly fabricated bionanocomposite hydrogel is an efficient, cost-effective, easy-separable, and green adsorbent that could be potentially utilized to remove divalent nickel ions from wastewater.

Potentially toxic elements (PTEs) in coastal sediments of Bandar Abbas city, North of Persian Gulf: An ecological risk assessment.

The concentration of potentially toxic elements (PTEs; Lead (Pb), Nickel (Ni), and Cadmium (Cd) Pb, Ni, and Cd), using flame atomic absorption spectrometry (FAAS) was measured in fifty surface coastal sediment samples collected from 5 points coastal sediment of Bandar Abbas city, Iran besides the potential ecological risk index (RI) estimated the environmental health risk. The rank order of PTEs was Pb (52.090 ± 4.113 mg/kg dry weight) > Ni (34.940 ± 8.344 mg/kg dry weight) > Cd (2.944 ± 0.013 mg/kg dry weight). RI due to PTEs in sediments for A, B, C, D, and E points were 187.655, 190.542, 191.079, 189.496, and 192.053, respectively. RI for sampling points A to E was at moderate risk (150 ≤ RI < 300). Therefore, it is recommended to carry out control programs to reduce the amount of PTEs in the coastal sediment of the Persian Gulf.

Extrapolation of Metal Toxicity Data for the Rotifer Brachionus calyciflorus Using an Individual-Based Population Model.

Ecological risk assessment (ERA) of metals typically starts from standardized toxicity tests, the data from which are then extrapolated to derive safe concentrations for the envisioned protection goals. Because such extrapolation in conventional ERA lacks ecological realism, ecological modeling is considered as a promising new approach for extrapolation. Many published population models are complex, that is, they include many processes and parameters, and thus require an extensive dataset to calibrate. In the present study, we investigated how individual-based models based on a reduced version of the Dynamic Energy Budget theory (DEBkiss IBM) could be applied for metal effects on the rotifer Brachionus calyciflorus. Data on survival over time and reproduction at different temperatures and food conditions were used to calibrate and evaluate the model for copper effects. While population growth and decline were well predicted, the underprediction of population density and the mismatch in the onset of copper effects were attributed to the simplicity of the approach. The DEBkiss IBM was applied to toxicity datasets for copper, nickel, and zinc. Predicted effect concentrations for these metals based on the maximum population growth rate were between 0.7 and 3 times higher in all but one case (10 times higher) than effect concentrations based on the toxicity data. The size of the difference depended on certain characteristics of the toxicity data: both the steepness of the concentration-effect curve and the relative sensitivity of lethal and sublethal effects played a role. Overall, the present study is an example of how a population model with reduced complexity can be useful for metal ERA. Environ Toxicol Chem 2024;43:324-337. © 2023 SETAC.

Characterization of nickel levels considering seasonal and intra-individual variation using three biological matrices.

Nickel compounds are classified as group 1 carcinogens by the International Agency for Research on Cancer. However, only a few exposure assessment studies have been conducted on such compounds to date. In this study, we investigated the distribution of nickel in three biological types of samples (blood, serum, and urine) and its temporal variability through repeated measurements. From 2020 to 2021, blood and urine samples were collected for four times from 50 healthy participants. Nickel concentrations were determined using inductively coupled plasma mass spectrometry, and inter-individual correlation was calculated from linear mixed model. The overall geometric mean of nickel was 1.028 µg/L in blood, 0.687 µg/L in serum, and 1.464 µg/L in urine. Blood nickel was the highest in November (blood: 1.197 µg/L), and the geometric mean of nickel concentrations in the serum and urine were the highest in March (serum: 1.146 µg/L; urine: 1.893 µg/L). This matched seasonal trends for fine particulate matter concentrations from 2020 to 2021. Thus, seasonal effects significantly affect nickel levels in blood, serum, and urine. The inter-individual correlations were low as 0.081 for blood and 0.064 for urine. In addition, the correlation of nickel levels between each biological sample was low. It was also found that age, gender, commuting time, and different matrices affect concentrations. Blood and serum nickel levels were high in this study compared to other nationwide data, with urinary nickel ranking the second highest among the six countries examined. Therefore, biomonitoring study in the general population should be conducted, and finding a suitable matrix that can reflect nickel exposure to set exposure guideline levels is imperative.

Accumulation characteristics of metals in human breast milk and association with dietary intake in northeastern China.

The trace elements present in breast milk play a vital role in the growth and development of infants. Nevertheless, numerous studies have reported the presence of toxic metal contamination in breast milk from various countries and regions, which poses potential risks to breastfed infants. This article aimed to investigate the characteristics of trace elements in breast milk and explore the relationship between breast milk and diet in Dalian, a coastal city in northeastern China. Breast milk samples and representative local food samples were collected from Dalian for research. The results revealed that 57 % of breast milk samples significantly exceeded the WHO safety limit (0.6 µg/L) for arsenic, with a measured mean value of 0.96 µg/L. Moreover, the levels of chromium (mean value: 2.63 µg/L) in 34 % of breast milk samples exceed the WHO recommended safety level (chromium: 1.5 µg/L). Aquatic foods accounted for 60 % to 90 % of the total intake of arsenic, cadmium, vanadium, mercury, and lead. The Spearman correlation analysis demonstrated strong positive correlations among breast milk metal elements, including copper-zinc (r = 0.68) and nickel­chromium (r = 0.89). Furthermore, the food-to-milk accumulation factors (FMAF) of strontium, nickel, arsenic, vanadium, cadmium, and mercury were relatively low (median values <0.005). While the FMAF values for chromium and lead were higher, with median values of 0.038 and 0.07, respectively. The results indicated potential risks of the toxic metal arsenic in breast milk from Dalian, China for breastfed infants. Therefore, continuous monitoring of breast milk for toxic metals and foodborne contamination is necessary.

Toxicity factors to assess the ecological risk for soil microbial communities.

The toxicity factor (TF), a critical parameter within the potential ecological risk index (RI), is determined without accounting for microbial factors. It is considerable uncertainty exists concerning its validity for quantitatively assessing the influence of metal(loid)s on microorganisms. To evaluate the suitability of TF, we constructed microcosm experiments with varying RI levels (RI = 100, 200, 300, 500, and 700) by externally adding zinc (Zn), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), cadmium (Cd), and mercury (Hg) to uncontaminated soil (CK). Quantitative real-time PCR (qPCR) and high-throughput sequencing techniques were employed to measure the abundance and community of bacteria and fungi, and high-throughput qPCR was utilised to quantify functional genes associated with CNPS cycles. The results demonstrated that microbial diversity and function exhibited significant alterations (p < 0.05) in response to increasing RI levels, and the influences on microbial community structure, enzyme activity, and functional gene abundances were different due to the types of metal(loid)s treatments. At the same RI level, significant differences (p < 0.05) were discerned in microbial diversity and function across metal(loid) treatments, and these differences became more pronounced (p < 0.001) at higher levels. These findings suggest that TF may not be suitable for the quantitative assessment of microbial ecological risk. Therefore, we adjusted the TF by following three steps (1) determining the adjustment criteria, (2) deriving the initial TF, and (3) adjusting and optimizing the TF. Ultimately, the optimal adjusted TF was established as Zn = 1.5, Cr = 4.5, Cu = 6, Pb = 4.5, Ni = 5, Cd = 22, and Hg = 34. Our results provide a new reference for quantitatively assessing the ecological risks caused by metal(loid)s to microorganisms.

Associations between metal(loid) exposure with overweight and obesity and abdominal obesity in the general population: A cross-sectional study in China.

Previous studies have revealed links between metal(loid)s and health problems; however, the link between metal(loid)s and obesity remains controversial. We evaluated the cross-sectional association between metal(loid) exposure in whole blood and obesity among the general population. Vanadium (V), chromium (Cr), manganese (Mn), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), selenium (Se), molybdenum (Mo), cadmium (Cd), antimony (Sb), thallium (T1), and lead (Pb) were measured in 3029 subjects in Guangdong Province (China) using ICP-MS. The prevalence of overweight and obesity (OWO) and abdominal obesity (AOB) was calculated according to body mass index (BMI) and waist circumference (WC), respectively. Multivariate analysis showed that elevated blood Cu, Cd, and Pb levels were inversely associated with the risk of OWO, and these associations were confirmed by a linear dose-response relationship. Elevated blood Co concentration was associated with a decreased risk of AOB. A quantile g-computation approach showed a significantly negative mixture-effect of 13 metal(loid)s on OWO (OR: 0.96; 95% CI: 0.92, 0.99). Two metals-Ni and Mo-were inversely associated with the risk of OWO but positively associated with AOB. We cross-grouped the two obesity measurement types and found that the extremes of metal content were present in people with AOB only. In conclusion, blood Cu, Mo, Ni, Cd, and Pb were inversely associated with the risk of OWO. The presence of blood Co may be protective, while Ni and Mo exposure might increase the risk of AOB. The association between metal(loid) exposure and obesity warrants further investigation in longitudinal cohort studies.

Synthesis of ionically imprinted Poly(Alylthiourea) in the presence of 1-(2-Pyridylazo)-2-Napthol (PAN) for preconcentration in magnetic dispersive solid phase of nickel ions in water and food samples.

In the present study, a magnetic ion-imprinted polymer based on n-allylthiourea in the presence of 1-(2-pyridylazo)-2-naphthol (MIIP-PAN) was synthesized, characterized, and applied in the preconcentration of nickel ions by dispersive magnetic solid phase extraction (DMSPE) with FAAS detection. For comparison, non-imprinted polymer (MNIP-PAN) and imprinted polymer without PAN were synthesized. The characterization of the polymers was performed by FT-IR, DRX, TEM, TGA, VSM, and BET. Selectivity studies were performed comparing the competitive adsorption of Ni2+ with other cations on MIIP-PAN and MNIP-PAN, achieving higher relative selectivity coefficients for MIIP-PAN than for MNIP-PAN and NIP. Under optimized conditions, the method provided a preconcentration factor of 76.70, detection limit of 0.25 µg/L and intra-day (2.06 - 2.33 %) and inter-day (1.82 - 4.90 %) precision. The developed method was applied to samples of water, teas, and chocolate powder, and its precision was evaluated through tests of recovery and analysis of certified materials.

Effect of Mobile Phone with and without Earphones Usage on Nickel Ion Release from Fixed Orthodontic Appliance.

INTRODUCTION: This study is an attempt to assess whether the usage of headphones could minimize the nickel ion release from fixed orthodontic appliance compared with hand-held mobile phones. The aim of the study is to validate the hypothesis whether there is a significant variation in nickel ion release from fixed orthodontic appliance among the patients using hand-held mobile phones and patients using mobile earphones. MATERIALS AND METHODS: This is a cross-sectional study where a total of 60 healthy individuals who were undergoing fixed orthodontic treatment in the Department of Orthodontics and Dentofacial Orthopedics, Adhiparasakthi Dental College and Hospital, Melmaruvathur, Chennai, India, and all these individuals were bonded and banded. All of them are class I malocclusion with bimaxillary protrusion. Salivary samples were collected in their regular checkup after two months and 7th, 14th, and 21st days salivary nickel level was evaluated based on their usage of mobile phones with earphones and without earphones. RESULTS: In this study, paired and independent t-tests were used. On basis of statistics results, the mean of nickel release in both male and female participants using mobile phones without earphones were significantly higher than the participants using mobile phone with earphones. CONCLUSION: By our study, we concluded that usage of mobile phones with earphones has a significant reduced effect on metal ion release from fixed orthodontic appliance when compared to usage of mobile phones without earphones.

Urinary heavy metals and attention-deficit/hyperactivity symptoms of preschool children: a mixed-exposure analysis.

The neurotoxic effects of certain heavy metals are well established, but only a few studies have investigated the joint effect of concurrent exposure to multiple ones. The study aims to evaluate the association between mixed exposure to neurotoxic metals and the psychosocial behavior of preschool children. Using a stratified sampling strategy, we recruited participants from 105 kindergartens in 41 townships of Taiwan and excluded those with blood lead levels ≥ 3.5 µg/L. The first-morning void urines were collected and analyzed for cadmium, manganese, arsenic, chromium, lead, and nickel concentrations using inductively coupled plasma mass spectrometry. We applied the parentally reported Strengths and Difficulties Questionnaire (SDQ) and Swanson, Nolan, and Pelham IV (SNAP-IV) scales to evaluate the psychosocial behaviors. Multiple linear regressions were utilized to evaluate the associations between each heavy metal and the outcomes, while the mixed effect of concurrent exposure was estimated by using a Quantile g-computation approach. A total of 977 preschool children were included in the study, and the mean (SD) age was 5.7 (0.7) years old. In single pollutant models, we observed adverse effects of urinary manganese, nickel, arsenic, and lead on the specific subsets of SDQ. Furthermore, the combined effect of six heavy metals significantly affected the hyperactivity/inattention symptoms (beta = 0.46, 95% CI: 0.13-0.78, with all metals increased by one quartile), and chromium and lead were the two major contributors. Similar detrimental effects of urinary cadmium and lead were also observed in the SNAP-IV subsets, although the joint effect analysis was not significant. The study provided evidence that concurrent exposure to multiple heavy metals may exert increased risks of hyperactivity/inattention in children compared to single pollutant exposure. Further studies are needed to verify our findings regarding mixed exposure to multiple neurotoxic metals.